Customization: | Available |
---|---|
Torque: | 100nm |
Warranty: | 1 Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
HEM MULTI TURN ACTUATOR
Introducing the illustrious HEM series, a cutting-edge generation of multi-turn electric actuators meticulously crafted by the dedicated technical team at HeLi Company. This series seamlessly fuses the evolving needs of users with decades of insightful development experience. The HEM series boasts unparalleled versatility, offering models to suit every requirement, including basic, intelligent, bus-type, and intelligent split-type configurations. These actuators are the epitome of safety, stability, and reliability, designed to cater to a myriad of application scenarios across diverse industries.
The HEM series multi-turn electric actuators are exceptionally versatile. They are compatible with linear stroke valves such as regulating valves, gate valves, and globe valves. Furthermore, they can be seamlessly equipped with part-turn worm gearboxes. This feature allows them to be used with quarter turn valves, including butterfly valves, ball valves, and plug valves, thus showcasing their extensive adaptability.
To maintain optimal performance and longevity, it is advisable that the running speed is moderated when the actuator is directly installed on the gate valve, considering the inertia effect and the potential wear of the drive shaft sleeve. is directly installed on the gate valve.
The torque can be finely tuned, with the maximum torque set in both directions at the nominal torque level. The locked torque is influenced by speed and voltage, and it generally ranges from
1.4 to 2 times the nominal torque.
For operations at 60Hz, it is recommended that the speed be increased by 20% to ensure efficiency.
Power specifications include 380VAC/3PH for both on-off and modulating types, accommodating up to 600 starts per hour, with an optional upgrade to 1200 starts for modulating types. Note: For basic types exceeding 36RPM, there is no overtorque protection.
Intelligent type | |||
Standard specification | Torque | 60-3000Nm(with out geer box) | |
Output speed | 18-144(rpm) | ||
Ambient Temperature | -30ºC-70ºC(-40ºC-70ºC as option) | ||
Vibration Resistance | Comply with JB/T8219 | ||
Noise Degree | Less than 70dB within 1 meter | ||
Cable Entries | 2×NPT 3/4,one replacement for NPT3/4(If you have any requirement of cable entry,pls kindly contact us) | ||
Enclosure Protection | IP67 as standard,IP68 as option(15m under water without leakage for 72 hours) | ||
Mounting Base | Standard JB2920(Clutch);ISO520(trust,spline) | ||
Technical Specification | Motor ratings | Class F,with 135ºC thermal protection | |
Duty ratings | ON-OFF,S2-15min,less than 600 starts/hour | ||
Modulationg:S4-25%,less than 600 starts/hour | |||
Option:1200 starts/hour | |||
Voltage | three phasse:AC380V(±10%)/50Hz(±5%)three phase four wires | ||
Option:1PH AC220V,AC415V and other voltages | |||
Protocol | Modbus,Profibus,Hart | ||
ON-OFF | Control signal | ON-OFF(dry contact,24V,220V,possible to exchange between inching and keep) | |
Feedback signal | 6×relay contacts(5×state relay+1×fault relay) | ||
1× analogue feedback:4-20mA,output impedance:≤750Ω(4-20mA as standard;0-10V,2-10V as option) | |||
Modulating | Control signal | ON-OFF(dry contact,24V,220V,possible to exchange between inching and keep) | |
Analogue signal:4-20mA,input impedance:≤750Ω(4-20mA as standard;0-10V,2-10V as option) | |||
Feedback signal | 6×relay contacts(5×state relay+1×fault relay) | ||
1× analogue feedback:4-20mA,output impedance:≤750Ω(4-20mA as standard;0-10V,2-10V as option) | |||
Deadband | 0.3-9.9% adjusted within full stroke | ||
Polarity | Yes | ||
Signal loss action | yes | ||
Oeration Mode | Indication | LCD display | |
Open/Close/Remote/Failure lamp(Digital shown in percent for position and torque | |||
Menu operation | Remote control or Selector switch | ||
Configuration set(position,status feedback,Max.torque) | |||
Local control | Command selector switch(OPEN/CLOSE/STOP) | ||
Mode selector switch(LOC/REM/OFF) | |||
Data logger and diagnostics | Infrared remote control suit menu to access the faultd diagnosis | ||
Others | Functions | Automatic phase correction(3PH only) Alarms(Local and remote) Bypsas torque switch | |
Torque protection Motor thermal protection Bypass torque switch | |||
Space heater ESD set(Open,Close,Keep) | |||
Average torque | |||
Infrared remote control suit menu to access the faultd diagnosis | |||
Option:Explosion proof infrared remote control |
1. who are we?
We are based in Zhejiang Province, China, start from 2003,sell to Domestic Market(47.00%),South America(12.00%),Southeast Asia(10.00%),Northern Europe(5.00%),Eastern Europe(4.00%),North America(3.00%),South Asia(3.00%),Western Europe(3.00%),Eastern Asia(3.00%),Oceania(3.00%),Southern Europe(3.00%),Africa(2.00%),Mid East(2.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Electric Actuator,Pneumatic Actuator,Damper Actuator,Motorized Ball Valve,Motorized Butterfly Valve
4. why should you buy from us not from other suppliers?
Founded in 2 0 0 3, more than 100 employees, including engineers and technicians accounted for 2 5 % Own 26 new utility patents and 2 invention patents. With CE, ROHS,SIL,IP67, IP68,CNEX, ATEX, and ISO9001 ,2015 (CQC) certificates.
5. what services can we provide?
Delivery Terms: FOB,CFR,CIF,EXW,FCA;
Payment Currency:USD,CNY;
Payment Type: T/T,L/C,Western Union,Cash;
Language Spoken:English,Chinese