| Customization: | Available |
|---|---|
| Torque: | 100nm |
| Warranty: | 1 Year |
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
HEM MULTI TURN ACTUATOR
Introducing the cutting-edge HEM series, a revolutionary line of multi-turn electric actuators skillfully crafted by the expert technical team at HeLi Company. Marrying decades of rich development experience with insightful user feedback, the HEM series is engineered with precision to cater to a spectrum of user requirements. Available in diverse models including basic, intelligent, bus-type, and intelligent split-type, this series embodies the pinnacle of safety, stability, and reliability, tailored to seamlessly adapt to a wide array of application scenarios across multiple industries.
The versatile HEM series multi-turn electric actuators are designed to enhance the functionality of linear stroke valves such as regulating valves, gate valves, and globe valves. Additionally, they can be paired with part-turn worm gearboxes, expanding their versatility to quarter turn valves including butterfly valves, ball valves, and plug valves, thus offering unmatched adaptability across various valve types.
To ensure optimal performance and reduce wear due to inertia, it is recommended that the running speed is moderated when the actuator is directly installed on the gate valve. is directly installed on the gate valve.
The actuator is engineered to manage maximum torque in both directions at the specified nominal torque. The locked torque can vary with speed and voltage, commonly
ranging from 1.4 to 2 times the nominal torque.
For operations at 60Hz, the speed should be enhanced by a factor of 1.2.
Operating on 380VAC/3PH, our actuators support both on-off and modulating types with 600 starts per hour (optionally extending to 1200 starts for modulating use). Note: For basic types exceeding 36RPM, there is no over-torque protection.
| Intelligent type | |||
| Standard specification | Torque | 60-3000Nm(with out geer box) | |
| Output speed | 18-144(rpm) | ||
| Ambient Temperature | -30ºC-70ºC(-40ºC-70ºC as option) | ||
| Vibration Resistance | Comply with JB/T8219 | ||
| Noise Degree | Less than 70dB within 1 meter | ||
| Cable Entries | 2×NPT 3/4,one replacement for NPT3/4(If you have any requirement of cable entry,pls kindly contact us) | ||
| Enclosure Protection | IP67 as standard,IP68 as option(15m under water without leakage for 72 hours) | ||
| Mounting Base | Standard JB2920(Clutch);ISO520(trust,spline) | ||
| Technical Specification | Motor ratings | Class F,with 135ºC thermal protection | |
| Duty ratings | ON-OFF,S2-15min,less than 600 starts/hour | ||
| Modulationg:S4-25%,less than 600 starts/hour | |||
| Option:1200 starts/hour | |||
| Voltage | three phasse:AC380V(±10%)/50Hz(±5%)three phase four wires | ||
| Option:1PH AC220V,AC415V and other voltages | |||
| Protocol | Modbus,Profibus,Hart | ||
| ON-OFF | Control signal | ON-OFF(dry contact,24V,220V,possible to exchange between inching and keep) | |
| Feedback signal | 6×relay contacts(5×state relay+1×fault relay) | ||
| 1× analogue feedback:4-20mA,output impedance:≤750Ω(4-20mA as standard;0-10V,2-10V as option) | |||
| Modulating | Control signal | ON-OFF(dry contact,24V,220V,possible to exchange between inching and keep) | |
| Analogue signal:4-20mA,input impedance:≤750Ω(4-20mA as standard;0-10V,2-10V as option) | |||
| Feedback signal | 6×relay contacts(5×state relay+1×fault relay) | ||
| 1× analogue feedback:4-20mA,output impedance:≤750Ω(4-20mA as standard;0-10V,2-10V as option) | |||
| Deadband | 0.3-9.9% adjusted within full stroke | ||
| Polarity | Yes | ||
| Signal loss action | yes | ||
| Oeration Mode | Indication | LCD display | |
| Open/Close/Remote/Failure lamp(Digital shown in percent for position and torque | |||
| Menu operation | Remote control or Selector switch | ||
| Configuration set(position,status feedback,Max.torque) | |||
| Local control | Command selector switch(OPEN/CLOSE/STOP) | ||
| Mode selector switch(LOC/REM/OFF) | |||
| Data logger and diagnostics | Infrared remote control suit menu to access the faultd diagnosis | ||
| Others | Functions | Automatic phase correction(3PH only) Alarms(Local and remote) Bypsas torque switch | |
| Torque protection Motor thermal protection Bypass torque switch | |||
| Space heater ESD set(Open,Close,Keep) | |||
| Average torque | |||
| Infrared remote control suit menu to access the faultd diagnosis | |||
| Option:Explosion proof infrared remote control | |||
Founded in 2003, Wenzhou Heli Automatic Meter Co., Ltd. stands as a beacon of innovation and technology. Specializing in the development and production of control valves, electric actuators, pneumatic actuators, damper actuators, electric valves, and pneumatic valves, we are a trusted choice for industries worldwide.
(The certificates displayed represent just a fraction of our extensive certification portfolio.)
1. who are we?
We are based in Zhejiang Province, China, start from 2003,sell to Domestic Market(47.00%),South America(12.00%),Southeast Asia(10.00%),Northern Europe(5.00%),Eastern Europe(4.00%),North America(3.00%),South Asia(3.00%),Western Europe(3.00%),Eastern Asia(3.00%),Oceania(3.00%),Southern Europe(3.00%),Africa(2.00%),Mid East(2.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Electric Actuator,Pneumatic Actuator,Damper Actuator,Motorized Ball Valve,Motorized Butterfly Valve
4. why should you buy from us not from other suppliers?
Founded in 2 0 0 3, more than 100 employees, including engineers and technicians accounted for 2 5 % Own 26 new utility patents and 2 invention patents. With CE, ROHS,SIL,IP67, IP68,CNEX, ATEX, and ISO9001 ,2015 (CQC) certificates.
5. what services can we provide?
Delivery Terms: FOB,CFR,CIF,EXW,FCA;
Payment Currency:USD,CNY;
Payment Type: T/T,L/C,Western Union,Cash;
Language Spoken:English,Chinese
){kind=link}