Customization: | Available |
---|---|
Certification: | RoHS, CE |
Power Supply: | AC220V |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Basic Specification | |
Torque | 50-6000Nm |
Power supply | AC24V/220V/380V..(±10%)DC12V/24V/48V.(±10%) |
Frequency | 50/60Hz(±5%) |
Rotary angle | 0-90°(±1%) |
Travel/assistant switch | 2xSPDT,250VAC 5A |
Cable gland | On off type:1-M20x1.5 |
Flange | Modulating type/Intelligent type:2-M20x1.5 |
ISO5211 | |
Indicator | Indication arrow/3D dome indicator |
Manual | Allen key(hand wheel as optional) |
Protection class | IP67(IP68 as optional,15meter-72hour) |
Working conditions | Temperature:-25ºC~70ºC(Optional:-40ºC~65ºC) |
Humidity:≤95% | |
Anti-condensation | Heater |
Overheat protection | Motor overheat protection,starting temperature:125ºC(±5%) |
Power failure state | Last position |
Signal failure state | 4-20mA/2-10Vfull open/close (factory defaults is signal failure for last position) |
Duty cycle | On off type:S2-15 Min;Modulating type:S4-50% |
Overtorque | Optional |
Shock resistance | XYZ 10g,0.2~34Hz,30 Min |
Motor | Squirrel cage induction motor,class F |
Noisy | ≤70dB(A)-1M |
Mechanical Data | ||||
Model | Toque (Nm) |
Adapte (mm) |
Flange ISO5211 |
On off type Weight(KG) |
HL1-05 | 50 | 14*14 | F03/F05/F07 | 3 |
HL2-10 | 100 | 17*17 | F05/F07 | 4.5 |
HL2-16 | 160 | 17*17 | F05/F07 | 4.5 |
HL3-25 | 250 | 22*22 | F07/F10/F12 | 9.8 |
HL3-40 | 400 | 22*22 | F07/F10/F12 | 9.8 |
HL3-60 | 600 | 27*27 | F07/F10/F12 | 9.8 |
HL4-100 | 1000 | 27*27 | F12 or F10/F14 | 14.5 |
HL4-160 | 1600 | 36*36 | F12 or F10/F14 | 14.5 |
HL4-200 | 2000 | 36*36 | F12 or F10/F14 | 14.5 |
HL5-250 | 2500 | 36*36 | F14 or F12 or F16 | 24.9 |
HL5-300 | 3000 | 36*36 | F14 or F12 or F16 | 24.9 |
HL6-400 | 4000 | 46*46 | F16 or F25 | 43.5 |
HL6-600 | 6000 | 46*46 | F16 or F25 | 57.1 |
Electrical Performance Data | |||||||
1PH | |||||||
Model | Torque (Nm) |
Time (Sec/0-90°) |
Motor power (W) |
110V AC Current(A) | 220V AC Current (A) | ||
Running | Blocking | Running | Blocking | ||||
HL1-05 | 50 | 30 | 10 | 0.45 | 0.67 | 0.24 | 0.31 |
HL2-10 | 100 | 20 | 30 | 0.65 | 0.96 | 0.35 | 0.45 |
HL2-16 | 150 | 30 | 30 | 0.65 | 0.96 | 0.35 | 0.45 |
HL3-25 | 250 | 30 | 40 | 0.72 | 1.41 | 0.38 | 0.71 |
HL3-40 | 400 | 30 | 60 | 1 | 1.74 | 0.5 | 0.95 |
HL3-60 | 600 | 30 | 90 | 1.5 | 2.62 | 0.75 | 1.48 |
HL4-100 | 1000 | 30 | 150 | 3 | 5.92 | 1.5 | 2.87 |
HL4-160 | 1600 | 50 | 150 | 3 | 5.92 | 1.5 | 2.87 |
HL4-200 | 2000 | 60 | 150 | 3 | 5.92 | 1.5 | 2.87 |
HL5-250 | 2500 | 50 | 200 | 3.9 | 7.24 | 1.9 | 3.05 |
HL5-300 | 3000 | 60 | 200 | 3.9 | 7.24 | 1.9 | 3.05 |
HL6-400 | 4000 | 100 | 200 | 4.1 | 7.13 | 2.1 | 3.17 |
HL6-600 | 6000 | 150 | 200 | 4.1 | 7.13 | 2.1 | 3.17 |
DC | |||||||
Model | Torque (Nm) |
Time (Sec/0-90°) |
Motor power (W) |
24V DC Current(A) | 48V DC Current (A) | ||
Running | Blocking | Running | Blocking | ||||
HL1-05 | 50 | 20 | 15 | 1.1 | 2.6 | 0.7 | 1.5 |
HL2-10 | 100 | 15 | 25 | 1.7 | 2.7 | 0.8 | 1.6 |
HL2-16 | 150 | 20 | 25 | 1.7 | 2.7 | 0.9 | 1.6 |
HL3-25 | 250 | 15 | 40 | 4 | 6.5 | 2.1 | 5.3 |
HL3-40 | 400 | 15 | 60 | 6.8 | 10.3 | 3.6 | 5.3 |
HL3-60 | 600 | 15 | 90 | 9.5 | 15.8 | 4.6 | 6.5 |
HL4-100 | 1000 | 30 | 90 | 9.5 | 16.4 | 4.6 | 6.5 |
HL4-160 | 1600 | 30 | 120 | 15 | 27 | 8 | 10.3 |
HL4-200 | 2000 | 30 | 150 | 18 | 27 | 10 | 15.8 |
3PH | |||||||
Model | Torque (Nm) |
Time (Sec/0-90°) |
Motor power (W) |
380V AC Current(A) | 440V AC Current (A) | ||
Running | Blocking | Running | Blocking | ||||
HL1-05 | 50 | 30 | 10 | 0.11 | 0.13 | 0.1 | 0.12 |
HL2-10 | 100 | 20 | 30 | 0.12 | 0.17 | 0.11 | 0.13 |
HL2-16 | 150 | 30 | 30 | 0.13 | 0.17 | 0.12 | 0.13 |
HL3-25 | 250 | 30 | 40 | 0.18 | 0.25 | 0.17 | 0.23 |
HL3-40 | 400 | 30 | 60 | 0.25 | 0.49 | 0.23 | 0.47 |
HL3-60 | 600 | 30 | 90 | 0.3 | 0.49 | 0.27 | 0.47 |
HL4-100 | 1000 | 30 | 150 | 0.67 | 1.31 | 0.59 | 1.11 |
HL4-160 | 1600 | 50 | 150 | 0.67 | 1.31 | 0.59 | 1.11 |
HL4-200 | 2000 | 60 | 150 | 0.67 | 1.31 | 0.59 | 1.11 |
HL5-250 | 2500 | 50 | 200 | 0.9 | 1.76 | 0.79 | 1.54 |
HL5-300 | 3000 | 60 | 200 | 0.9 | 1.76 | 0.79 | 1.54 |
HL6-400 | 4000 | 100 | 200 | 0.9 | 1.76 | 0.79 | 1.54 |
HL6-600 | 6000 | 150 | 200 | 0.9 | 1.76 | 0.79 | 1.54 |