Customization: | Available |
---|---|
Torque: | 100nm |
Warranty: | 1 Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
HEM MULTI TURN ACTUATOR
Introducing the HEM series: a groundbreaking range of multi-turn electric actuators meticulously crafted by the expert technical team at HeLi Company. This innovative series is the culmination of cutting-edge technology and extensive experience, designed to cater to your specific needs. Available in various models—basic, intelligent, bus-type, and intelligent split-type—these actuators are engineered to deliver unparalleled safety, stability, and reliability. Perfectly adaptable for diverse applications across multiple sectors.
The versatile HEM series multi-turn electric actuators seamlessly integrate with a variety of linear stroke valves, including regulating valves, gate valves, and globe valves, offering flexibility and efficiency to your operations. Further versatility is ensured when paired with part-turn worm gearboxes, expanding their utility to quarter turn valves such as butterfly valves, ball valves, and plug valves, broadening the scope of application and enhancing operational capabilities.
To maintain optimal performance and prevent premature wear due to the inertia effect on the drive shaft sleeve, it’s advisable to moderate the running speed when directly mounting the actuator on a gate valve. is directly installed on the gate valve.
The maximum torque is strategically set in dual directions at the nominal torque level. However, understand that the locked torque is influenced by speed and voltage, typically amounting to
approximately 1.4 to 2 times the nominal torque, ensuring robustness and adaptability.
For orders operating at 60Hz, the speed should be calibrated to increase by 1.2 times for optimal performance.
Our 380VAC/3PH variants are available in on-off and modulating types, supporting up to 600 starts per hour (with an optional 1200 starts for modulating). Note: For basic types exceeding 36RPM, no over-torque protection is included.
Intelligent type | |||
Standard specification | Torque | 60-3000Nm(with out geer box) | |
Output speed | 18-144(rpm) | ||
Ambient Temperature | -30ºC-70ºC(-40ºC-70ºC as option) | ||
Vibration Resistance | Comply with JB/T8219 | ||
Noise Degree | Less than 70dB within 1 meter | ||
Cable Entries | 2×NPT 3/4,one replacement for NPT3/4(If you have any requirement of cable entry,pls kindly contact us) | ||
Enclosure Protection | IP67 as standard,IP68 as option(15m under water without leakage for 72 hours) | ||
Mounting Base | Standard JB2920(Clutch);ISO520(trust,spline) | ||
Technical Specification | Motor ratings | Class F,with 135ºC thermal protection | |
Duty ratings | ON-OFF,S2-15min,less than 600 starts/hour | ||
Modulationg:S4-25%,less than 600 starts/hour | |||
Option:1200 starts/hour | |||
Voltage | three phasse:AC380V(±10%)/50Hz(±5%)three phase four wires | ||
Option:1PH AC220V,AC415V and other voltages | |||
Protocol | Modbus,Profibus,Hart | ||
ON-OFF | Control signal | ON-OFF(dry contact,24V,220V,possible to exchange between inching and keep) | |
Feedback signal | 6×relay contacts(5×state relay+1×fault relay) | ||
1× analogue feedback:4-20mA,output impedance:≤750Ω(4-20mA as standard;0-10V,2-10V as option) | |||
Modulating | Control signal | ON-OFF(dry contact,24V,220V,possible to exchange between inching and keep) | |
Analogue signal:4-20mA,input impedance:≤750Ω(4-20mA as standard;0-10V,2-10V as option) | |||
Feedback signal | 6×relay contacts(5×state relay+1×fault relay) | ||
1× analogue feedback:4-20mA,output impedance:≤750Ω(4-20mA as standard;0-10V,2-10V as option) | |||
Deadband | 0.3-9.9% adjusted within full stroke | ||
Polarity | Yes | ||
Signal loss action | yes | ||
Oeration Mode | Indication | LCD display | |
Open/Close/Remote/Failure lamp(Digital shown in percent for position and torque | |||
Menu operation | Remote control or Selector switch | ||
Configuration set(position,status feedback,Max.torque) | |||
Local control | Command selector switch(OPEN/CLOSE/STOP) | ||
Mode selector switch(LOC/REM/OFF) | |||
Data logger and diagnostics | Infrared remote control suit menu to access the faultd diagnosis | ||
Others | Functions | Automatic phase correction(3PH only) Alarms(Local and remote) Bypsas torque switch | |
Torque protection Motor thermal protection Bypass torque switch | |||
Space heater ESD set(Open,Close,Keep) | |||
Average torque | |||
Infrared remote control suit menu to access the faultd diagnosis | |||
Option:Explosion proof infrared remote control |
1. who are we?
We are based in Zhejiang Province, China, start from 2003,sell to Domestic Market(47.00%),South America(12.00%),Southeast Asia(10.00%),Northern Europe(5.00%),Eastern Europe(4.00%),North America(3.00%),South Asia(3.00%),Western Europe(3.00%),Eastern Asia(3.00%),Oceania(3.00%),Southern Europe(3.00%),Africa(2.00%),Mid East(2.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Electric Actuator,Pneumatic Actuator,Damper Actuator,Motorized Ball Valve,Motorized Butterfly Valve
4. why should you buy from us not from other suppliers?
Founded in 2 0 0 3, more than 100 employees, including engineers and technicians accounted for 2 5 % Own 26 new utility patents and 2 invention patents. With CE, ROHS,SIL,IP67, IP68,CNEX, ATEX, and ISO9001 ,2015 (CQC) certificates.
5. what services can we provide?
Delivery Terms: FOB,CFR,CIF,EXW,FCA;
Payment Currency:USD,CNY;
Payment Type: T/T,L/C,Western Union,Cash;
Language Spoken:English,Chinese