Customization: | Available |
---|---|
Certification: | ISO, CE |
Power Supply: | AC220V |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Basic Specification | |
Voltage | AC24/110V/220V/380V...(±10%)DC24...(±10%) |
Frequency | 50/60Hz(±5%) |
Torque | 50-3000N.m(without gearbox);3000-10000N.m(with gearbox) |
Angle | 90° |
Travel switch | 2×SPDT,250VAC5A |
Assistant switch | 2×SPDT,250VAC5A |
Cable gland | Standard:2-M20x1.5 |
On-off type | Input signal:ON-OFF |
Feedback dry contact+wet contact | |
Modulating type | Input signal 4-20mA(factory setting)/2-10V/0-10V optional |
Output signal 4-20mA(factory setting)/2-10V/0-10V optional | |
Flange | IS05211 Standard |
Position indicator | Flat(3D indicator as option) |
Manual Override | Allen key(Handwheel as option) |
Protection class | IP67,(Ip68 as option 10m.72hours) |
Ambient temperature | -30ºC - +70ºC |
Over torque protection | Torque≥250Nm as option |
Anti-condensation | Heater,(Breathe valve as option) |
Overheat protection | Built-in motorthermal protection.Temp.125ºC±5ºC |
Power failure state | The last position |
Signal failure state | 4-20mA/2-10V:can set full open or full close(factory setting is position protection) |
0-10V:full close |