Customization: | Available |
---|---|
Certification: | ISO, CE |
Power Supply: | AC220V |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Basic Specification | |
Voltage | AC 24V/220V/230V/380...(±10%)DC24... (±10%) |
Frequency | 50/60 Hz(±5%) |
Torque | 25Nm-8000Nm |
Angle | 90° |
Travel switch | 2×SPDT,250VAC 5A |
Assistant switch | 2×SPDT,250VAC 5A |
Cable gland | <100Nm:2-M20*1.5,≥100Nm:2×PG16 |
On-off type | Feedback dry contact |
Feedback dry contact+wet contact | |
Modulating type | Input signal 4-20mA(factory setting)/2-10V/0-10V optional |
Output signal 4-20mA(factory setting)/2-10V/0-10V optional | |
Flange | ISO5211 Standard |
Position indicator | 3D dome indicator,optional pointer indicate |
Manual Override | Handwheel |
Protection class | IP67,IP68 as optional |
Ambient temperature | -25ºC~70ºC |
Over torque protection | Optional |
Anti-condensation | Heater |
Overheat protection | Built-in motor thermal protection.Temp.125ºC±5ºC |
Power failure state | The last position |
Signal failure state | 4-20mA/2-10V:can set full open or full close(factory setting is position protection) |
0-10V:full close |
General Specification | |||||
Model | Max Torque (Nm) |
Time (s/90°) |
Rated Current(A) | Flange(ISO5211) | |
AC220V | AC380V | ||||
HEQ1-05 | 50 | 20 | 0.25 | 0.11 | F05/F07 |
HEQ1-08 | 80 | 30 | 0.25 | 0.11 | F05/F07 |
HOM2-10 | 100 | 19 | 0.42 | 0.32 | F07/F10 |
HOM2-20 | 200 | 39 | 0.42 | 0.32 | F07/F10 |
HOM2-30 | 300 | 39 | 0.46 | 0.35 | F07/F10 |
HOM3-40 | 400 | 29 | 0.9 | 0.62 | F10/F12 |
HOM3-60 | 600 | 39 | 0.9 | 0.62 | F10/F12 |
HOM3-80 | 800 | 47 | 0.9 | 0.62 | F10/F12 |
HOM3-100 | 1000 | 47 | 1.1 | 0.8 | F10/F12 |
HOM3-130 | 1300 | 47 | 1.3 | 0.92 | F10/F12 |
HOM4-170 | 1700 | 34 | 2.2 | 1.1 | F12/F16 orF14 |
HOM4-200 | 2000 | 34 | 2.5 | 1.3 | F12/F16 orF14 |
HOM4-230 | 2300 | 47 | 2.2 | 1.1 | F12/F16 orF14 |
HOM4JS-350 | 3500 | 76 | 2.2 | 1.1 | F16/F25 |
HOM4JS-500 | 5000 | 136 | 2.2 | 1.1 | F16/F25 |
HOM4JS-800 | 8000 | 188 | 2.2 | 1.1 | F16/F25 |